Report and Budget

Report

The protoype was designed with the necessity about the process of the serigraph and is built and adapted in some principal stages arised modifications. In this parcial we were focus in mechanic and power part. Because the principal thing is increase the efficiency of the mechanism and with that we can apply the control part on the machine. 

We get the mesh with the logo of the FIE and was adjusted  it accoding with the prototype. 

We did the counter and the clock on PCB and was welded the different circuits. And we controlled the step motor and this can move the mechanism that contains the mesh. 

Budget

Material	Unit	Unit price	Quantity	Cost
Mesh	Piece	$200	2	$400
Ink	Liter	$170	2	$340
T-shirt	Piece	$90	3	$270
Angle  1/8x1 in	Piece	$110.50	2	$221.00
servomotors	Piece	$165.00	2	$330.00
Wood	Sheet	$365.00	1	$365.00
acrylic	Sheet	$200.00	1	$200.00
Sailcloth	Meter	$50.00	1	$50.00
D.C. Motor	Piece	$50.00	6	$300.00
Switch	Piece	$10.00	1	$10.00
Display	Piece	$25.00	4	$100.00
PCB	Piece	$34.00	3	$102.00
Voltage source	Piece	$100.00	2	$200.00
Cable	Meter	$3.00	15	$45.00
Integrated circuits	Piece	$8.00	10	$80.00
Base circuits	Piece	$7	10	$70.00
Resistors	Piece	$1.00	40	$40.00
Screws	Piece	$0.50	105	$53
Electrodes	Kilogram	$40.00	1	$40.00
Diodes	Piece	$1.00	15	$15.00
Acrylic paint	Piece	$50.00	3	$150.00
Brushes 1 ½ in	Piece	$20.00	1	$20.00
Tines	Liter	$20.00	1	$20.00
Angle steel 1 ½ in	Piece	$179	1	$179
Terminals de 2	Piece	$5	15	$75
Terminals de 3	Piece	$10	10	$100
Maneral	Piece	$55	1	55
Angle Steel 1 in	Piece	$150	1	$150
Aluminum	Piece	$290	1	$290
chain	Piece	$60	3	$180
pulleys	Piece	$20	8	$160
Machuelo	Piece	$45	1	$45
			Total	$4865