IP Budget #4

   Up untill now  this is the consult and the consume an approximate of less than 1000 pesos .

COMPONENTS CLASSIFICATION	MATERIAL / EQUIPMENT	UNIT COST (PZ / mts / kg / etc)	TOTAL COST
Servos / motors	Servos	$110	$440
	Motor CD	$60	$120
Cables	Cable of 12	$60	$60
	Dupont cable	$2.5	$50
	UTP Cable	$10	$30
sensors	RGB	$175	$350
	PIR	$180	$180
micro controller	Pic 16F877a	$80	$160
Arduino	Arduino uno	$320	$320
Metals / plates	aluminum	$35	$200
	steel	$100	$400
	bakelite	$25	$100
	tin	$25	$25
substances	acid Ferric	$74	$74
	Welding Pasta	$20	$40
plastics	acrylic	$150	$300
	Roll rubber / rubber	$100	$300
electronic components	capacitors	$	$192
	LEDS	$ 5	$25
	diodes	$15	$90
	Resistors	$1	$30
	Terminals	$6	$30
	Quartz Crystal	$15	$15
	Porta circuits	$2	$14
Tools and mechanical operators	screws	$2	$60
	bits package	$50	$50
	tin	$95	$95
	Power Supply	$180	$180
	soldering	$80	$80
	Printer roller	$25	$75
	nuts	$15	$60
	Valeros	$25	$75
stationery	Photography leaves cuche	$1.5	$15
	white sheets	$.25	$20
parcel	Service	$200	$200
transportation	Route / cab / other	$45	$300
		Total	$4755

IP Report #4

Color qualifying Report

Whit the intention of present the integral proyect to technical form, take how priority the next  
text. The one very important pices of proyect is the mechanical part, that integral the funcionality of traslate tread. we are ready for builld one prototipe, which  first was desining  to elude fail in the phisical  inplementation and we can apication the learn obtain.

The members are very satisfied with the mechanism as we work together successfully in the realization of this not only in mechanics but also in the theory which makes all be prepared and aware of the mechanism.

More activities will be needed in the mechanical area because although a sketch in solidworks software has always performed variations which had to modify the structure into smaller parts.

It is estimated that the project and desirably mechanism to work and thanks to the collaboration of all team members and the information collected is able to form a classifier of toxic waste by colors.

Therefore it is expected that apart from proper operation for presentation to teachers can get implemented in a dedicated waste trafficking.

Most of the planned activities were implemented in the project because we organize everything that was necessary for the satisfactory completion even others that were not covered were performed.

 

This is the prototipe result.

Activity 1 of blog: How to charge a flat tire

 How to charge a flat a tire

Assigned date: 29 September

Delivery date: 2 October

By: Cortes Rodriguez Juan Francisco

Process to change a flat tire

First is necessary you have nex tools :

Jack

Spare tire

Cross key

 or    Wheel gun

       

1. Gather the necessary tools for change.
2. Loosen the nuts relevant, you're  using cross key, even while the vehicle is fully supported on the floor.
3. Place the jack under the framework of the wheel to be changed.  
4. Raise the vehicle using the jack until the tire change is completely lifted.
5. Remove the tire old.
6. Place the spare tire 
7. Whit cross key put the nuts on respecting the correct order.
8. Lower the vehicle
9. Finish tighten the nuts in the correct order, pairs of opposite adjusting nuts.
10. Back to the highway